222 thread locking agent
Low Strength and Thixotropic Viscosity
Used on most metal surfaces, easy to disassemble. Used for locking and sealing M2-M12 threads.
It is ideal to apply to threads less than 1/4'(6mm) or smaller of fasteners. It has a certain lubricity and can accurately achieve locking strength. 242 thread locking agent
General purpose, medium strength, thixotropic viscosity.
Used for locking and sealing of M6~M20 threads.
It is a detachable thread locking agent. It has a certain lubricity and can accurately achieve the locking strength. 243 thread locking agent
Oil resistance/medium strength.
Rapid curing, can be used for inert surface, good oil tolerance, easy disassembly.
It can be used on working surfaces with slight grease stains.
For locking and sealing threads below M20.
262 thread locking agent
High strength.
Suitable for most metal surfaces. Thixotropic viscosity, good chemical resistance.
For locking and sealing threads below M20.
It is a permanent locking agent for threads under poor chemical conditions.
It has excellent rust and corrosion resistance. 263 thread locking agent
High strength, low viscosity.
Permanent locking and sealing for threads below M36. 271 thread locking glue
High strength, low viscosity.
Permanent locking and sealing for threads below M36.
272 thread locking agent
High temperature/high strength.
High temperature resistance up to 230 C.
It can be used for locking double thread of cylinder head.
Rapid curing can be achieved for most surfaces, including unwashed fasteners.
Recommended for bolts below M36. Heating tools are required for disassembly. 277 thread locking agent
High strength, high viscosity.
Good chemical resistance.
Permanent locking and sealing for threads below M36.
It can prevent rust and corrosion of threads. When disassembling, heating tools should be disassembled. 290 Thread Locking Agent
Permeability/Medium Strength, Low Viscosity.
Rapid curing.
Used for locking and sealing of assembled M2~M12 threads. It can also be used for sealing micro-holes such as welds and sand holes in castings (less than 0.10mm).
To prevent rust and corrosion of threads, tools for local heating should be disassembled when disassembling.
295 thread locking agent
High strength, medium viscosity.
Applicable to inert surface.